Buzzer interruption button (signal failure) - Revision history

ErwinL: fixed a typo

2016-02-10T20:32:58Z

fixed a typo

← Older revision		Revision as of 20:32, 10 February 2016
Line 18:		Line 18:
	Switching off the horn does not solve the actual problem. You will need to [[Communication\|call the signal technician]] to get the signal repaired. Due to the operational rules, alternative measures must be taken. A faulty subsidiary signal replacement may not be activated anymore until an engineer has eliminated the disturbance. Until then, letting a train pass the signal can only be done by submitting written orders.		Switching off the horn does not solve the actual problem. You will need to [[Communication\|call the signal technician]] to get the signal repaired. Due to the operational rules, alternative measures must be taken. A faulty subsidiary signal replacement may not be activated anymore until an engineer has eliminated the disturbance. Until then, letting a train pass the signal can only be done by submitting written orders.

	After the horn has been silenced, the horn may sound again in case another signal gets disturbed. The Signal Fault ~~inidctaor~~ ('''S''') will flash until signal faults have been rectified.		After the horn has been silenced, the horn may sound again in case another signal gets disturbed. The Signal Fault indicator ('''S''') will flash until signal faults have been rectified.

Charlie at 22:41, 19 December 2011

2011-12-19T22:41:18Z

← Older revision		Revision as of 22:41, 19 December 2011
Line 16:		Line 16:
	== Notes ==		== Notes ==

	Switching off the horn does not solve the actual problem. You will need to [[Communication\|call the signal technician]] to get the signal repaired. Due to the operational ~~ruless~~ alternative measures must be taken. A faulty subsidiary signal replacement may not be activated anymore until an engineer has eliminated the disturbance. Until then, letting a train pass the signal can only be done by submitting written orders.		Switching off the horn does not solve the actual problem. You will need to [[Communication\|call the signal technician]] to get the signal repaired. Due to the operational rules, alternative measures must be taken. A faulty subsidiary signal replacement may not be activated anymore until an engineer has eliminated the disturbance. Until then, letting a train pass the signal can only be done by submitting written orders.

	After the horn has been silenced, the horn may sound again in case another signal gets disturbed. The Signal Fault inidctaor ('''S''') will flash until signal faults have been rectified.		After the horn has been silenced, the horn may sound again in case another signal gets disturbed. The Signal Fault inidctaor ('''S''') will flash until signal faults have been rectified.

ErwinL at 18:29, 19 October 2011

2011-10-19T18:29:35Z

← Older revision		Revision as of 18:29, 19 October 2011
Line 1:		Line 1:
	{{EnglishNav}}		{{EnglishNav}}

	~~{{EnglishConstruction}}~~

	== Purpose ==		== Purpose ==

ErwinL: /* Notes */

2011-10-19T18:29:23Z

Notes

← Older revision		Revision as of 18:29, 19 October 2011
Line 17:		Line 17:
	== Notes ==		== Notes ==

	Switching off the horn does not solve the actual problem. You will need to call the signal technician to get the signal repaired. Due to the operational ruless alternative measures must be taken. A faulty ~~susidiary~~ signal replacement may not be activated anymore until an engineer has eliminated the disturbance. Until then, letting a train pass the signal can only be done by submitting written orders.		Switching off the horn does not solve the actual problem. You will need to [[Communication\|call the signal technician]] to get the signal repaired. Due to the operational ruless alternative measures must be taken. A faulty subsidiary signal replacement may not be activated anymore until an engineer has eliminated the disturbance. Until then, letting a train pass the signal can only be done by submitting written orders.

	After the horn has been silenced, the horn may sound again in case another signal gets disturbed. The Signal Fault inidctaor ('''S''') will flash until signal faults have been rectified.		After the horn has been silenced, the horn may sound again in case another signal gets disturbed. The Signal Fault inidctaor ('''S''') will flash until signal faults have been rectified.

ErwinL: /* Notes */

2011-10-19T18:28:00Z

Notes

← Older revision		Revision as of 18:28, 19 October 2011
Line 17:		Line 17:
	== Notes ==		== Notes ==

	...		Switching off the horn does not solve the actual problem. You will need to call the signal technician to get the signal repaired. Due to the operational ruless alternative measures must be taken. A faulty susidiary signal replacement may not be activated anymore until an engineer has eliminated the disturbance. Until then, letting a train pass the signal can only be done by submitting written orders.

			After the horn has been silenced, the horn may sound again in case another signal gets disturbed. The Signal Fault inidctaor ('''S''') will flash until signal faults have been rectified.

ErwinL at 18:16, 19 October 2011

2011-10-19T18:16:18Z

← Older revision		Revision as of 18:16, 19 October 2011
Line 6:		Line 6:
	[[image:HuT.png\|thumb\|200px\|left\|Buzzer interruption button (signal failure)]]		[[image:HuT.png\|thumb\|200px\|left\|Buzzer interruption button (signal failure)]]

	...		When a signal has a defect, a horn will sound to alert the dispatcher. The horn can be silenced by pressing the Buzzer interruption button (HuT) .

	== Operation ==		== Operation ==

	...		In case of a defective signal the Signal Fault indicator ('''S''') will be flashing and a horn sounds. The affected signal's stop indicator is either flashing or extinguished. Pressing the HuT silences the acoustic signal. The Signal Fault indicator ('''S''') and the signal's stop indicator (if applicable) keep flashing.

			In case a Subsidiary Signal is set you might also encounter that the horn is activated as well as the Subsidiary Signal Fault indicator ('''Ers'''). This means that the Subsidiary Signals is in error. Press the [[Stop Signal Button]] (HaGT) together with the relevant signal button to switch off the Subsidiary Signal Fault indicator (Ers). The horn is silenced by pressing the HuT.

ErwinL: /* Operation */

2011-10-19T17:57:54Z

Operation

← Older revision		Revision as of 17:57, 19 October 2011
Line 9:		Line 9:

	== Operation ==		== Operation ==

			...


			== Notes ==

	...		...

ErwinL: Created page with '{{EnglishNav}} {{EnglishConstruction}} == Purpose == Buzzer interruption button (signal failure) ... == Operation == ...'

2011-09-18T09:01:47Z

Created page with '{{EnglishNav}} {{EnglishConstruction}} == Purpose == thumb|200px|left|Buzzer interruption button (signal failure) ... == Operation == ...'

New page

{{EnglishNav}}

{{EnglishConstruction}}

== Purpose ==
[[image:HuT.png|thumb|200px|left|Buzzer interruption button (signal failure)]]

...

== Operation ==

...