SratchPage: Difference between revisions

From SignalWiki
Jump to navigation Jump to search
(Replaced content with "Scratch page")
Line 1: Line 1:
{{DutchNav}}
Scratch page
{{Sprachen_DE|DE=Allgemeines Betriebssystem|EN=Generic Panel|NL=Algemeen Bedieningspaneel}}
 
==Algemeen Bedieningspaneel==
 
Een algemeen bedieningspaneel is een vereenvoudigde representatie van een seinhuis is, maar is geen specifiek seinhuissysteem zoals bijvoorbeeld Procesleiding of Sp Dr S60.
 
==Symbolen==
 
=== Hoofdsein ===
 
[[File:Generic panel main signal.png|none]]
 
Een hoofdsein wordt afgebeeld als een driehoek.
 
=== Hoofdsein + rangeersein ===
 
[[File:Generic panel main shunt signal.png|none]]
 
Een hoofdsein met rangeersein wordt afgebeeld als een driehoek plus een kleine rechthoek.
 
=== Automatisch bloksein ===
 
[[File:Generic panel automatic signal.png|none]]
 
Een hoofdsein wordt afgebeeld als een open driehoek.
 
=== Spoorsectie ===
 
[[File:Generic panel track section.png|none]]
 
=== Wissel ===
 
[[File:Generic panel switch.png|none]]
Wissel in doorgaande stand.
 
[[File:Generic panel switch inhibited.png|none]]
Wissel, verhinderd voor rijweginstelling. Het wissel omleggen is nog steeds mogelijk.
 
[[File:Generic panel switch locked.png|none]]
Wissel verhinderd. Een rijweg inleggen over het wissel is mogelijk, echter de stand van het wissel kan niet veranderd worden.
 
=== Rijrichting ===
 
[[File:Generic panel track direction.png|none]]
 
==Instellen rijwegen==
 
==Hulpknoppen algemeen bedieningspaneel==
 
{| cellpadding="10" cellspacing="0" border="1"
|-
| Omschrijving || Afk. || Functie
|-
! scope="row" colspan="3" style="color: white; background-color: grey;"| Baanvak
|-
| Rijrichting Baanvak Omdraaien || BD ||  
|-
! scope="row" colspan="3" style="color: black; background-color: yellow;"| Overwegen
|-
| Overweg Sluiten voor Wegverkeer || OS ||  
|-
| Overweg Gesloten Houden AAN || OAAN || Sluit een overweg en houdt deze gesloten
|-
| Overweg Gesloten Houden UIT || OUIT || Opheffen van het permanent gesloten houden van een overweg
|-
| Overweg Automatisch Sluiten UIT || OAUIT || Automatisch sluiten van een overweg inschakelen
|-
| Overweg Automatisch Sluiten AAN || OAAAN || Automatisch sluiten van een overweg uitschakelen
|-
! scope="row" colspan="3" style="color: white; background-color: green;"| Rijwegen
|-
| Herroepen Trein Rijweg || RHT || Herroepen van een trein rijweg
|-
| Herroepen Rangeerrijweg || RHR || Herroepen van een rangeerrijweg
|-
| Herroepen Element Trein Rijweg || RHTE || Herroepen van een element in een trein rijweg
|-
| Herroepen Element Rangeerrijweg || RHRE || Herroepen van een element in een rangeerrijweg
|-
| Geen Bovenleiding || RBOV || Instellen van een rijweg naar een spoor zonder bovenleiding
|-
| Geen Doorschietweg || RDG || Instellen van een rijweg zonder doorschietweg
|-
| Korte Doorschietweg || RDK || Instellen van een rijweg met verkorte doorschietweg
|-
| Doorschietweg naar Links || RDL || Instellen van een rijweg met een naar linksafbuigende doorschietweg
|-
| Doorschietweg naar Rechts || RDR || Instellen van een rijweg met een naar rechtsafbuigende doorschietweg
|-
| Verhinderen Bediening AAN || VAAN || Verhinderen van bediening van een sein óf het inleggen van een rijweg over een wissel of spoor
|-
| Verhinderen Bediening UIT || VUIT || Opheffen verhinderen van bediening van een element
|-
| Verhinderen Bediening Overbruggen || VOBR || Overbruggen van verhindering bediening. Alleen van toepassing op seinen
|-
! scope="row" colspan="3" style="color: white; background-color: red;"| Seinen
|-
| Sein Verhinderen AAN || SVAAN || Verhinderen bediening van een sein
|-
| Sein Verhinderen UIT || SVUIT || Opheffen verhinderen bediening van een sein
|-
| Oprij-Sein || SOPR || Inschakelen van het oprij-seinbeeld
|-
| Sein Activeren || SA || Sein activeren.
|-
| ARI Uitschakelen || SAUIT || Automatische Rijweg Instelling vanaf een sein inschakelen
|-
| ARI Inschakelen || SAAAN || Automatische Rijweg Instelling vanaf een sein uitschakelen
|-
| STOP || STOP || Sein op Stop zetten <br/> Zet een sein altijd op Stop vóór het herroepen van een rijweg of een doorschietweg, ook als het stoptonend is.
|-
! scope="row" colspan="3" style="color: white; background-color: blue;"| Wissels
|-
| Wissel Omleggen || WO || Omleggen van een wissel
|-
| Wissel Verhinderen AAN || WVAAN || Verhinderen van het omleggen van een wissel
|-
| Wissel Verhinderen UIT || WVUIT || Opheffen verhinderen van het omleggen van een wissel
|-
| Wissels Automatisch Omleggen UIT || WKUIT || Automatisch omleggen van wissels inschakelen
|-
| Wissels Automatisch Omleggen AAN || WKAAN || Automatisch omleggen van wissels uitschakelen
|-
! scope="row" colspan="3" | Overigen
|-
| Trein Rijweg || style="color: black; background-color: green;" | ZS || Instellen van een trein rijweg
|-
| Rangeerrijweg || style="color: black; background-color: blue;" | RS ||  Instellen van een rangeerrijweg
|-
|}
 
{{DutchNavBottom}}
 
{{EnglishNav}}
{{Sprachen_DE|DE=Allgemeines Betriebssystem|EN=Generic Panel|NL=Algemeen Bedieningspaneel}}
 
==Generic Panel==
==Symbols==
 
 
=== Main signal ===
 
[[File:Generic panel main signal.png|none]]
 
A main signal is represented as a triangle.
 
The signal's ID will have a red background to show that the signal is locked.
[[File:Generic panel main signal locked.png|none]]
 
A red circle will be shown around the signal button when the signal is inhibited for operation (Reminder On)
[[File:Generic panel main signal inhibited.png|none]]
 
It is possible to override an "inhibtion for operation" of a inhibited signal. In this case, a yellow circle will be shown around the signal button.
[[File:Generic panel main signal inhibit override.png|none]]
 
=== Main signal with shunt aspect ===
 
[[File:Generic panel main shunt signal.png|none]]
 
A main signal with shunt aspect is represented as a triangle plus a little rectangle.
 
=== Automatic block signal ===
 
[[File:Generic panel automatic signal.png|none]]
 
An automatic block signal is represented as a open triangle.
 
=== Track section ===
 
[[File:Generic panel track section.png|none]]
 
=== Points ===
 
[[File:Generic panel switch.png|none]]
Point in normal position.
 
[[File:Generic panel switch inhibited.png|none]]
Point, inhibited for route setting. throwing the point is still possible.
 
[[File:Generic panel switch locked.png|none]]
Point locked. A route can be set over the point, but it will not change position if needed for setting the route
 
=== Block Direction ===
 
[[File:Generic panel track direction.png|none]]
 
==Setting routes==
[[Routes]]
Setting routes requires pressing two buttons on the panel. Either two signal buttons (round dots) have to be pressed together, or a signal button together with an end button has to be pressed.
Finally, the button for the type of route has to be pressed. This can be either a main route (train route) or shunt route.
 
When all required buttons have been pressed, the system attempts to find a preset route that can be set between the start and end button. If a route exists, and all the interlocking safety checks pass, switches will be thrown into position. Finally, when all is ok with the route, the signal will go to proceed.
 
Setting a route can take time. It is not instantaneous. Do not press repeatedly or rapidly as this can cause panel malfunctions.
 
If a route appears to be set, but the signal does not go to “proceed”, check if there is a switch that could not be thrown, a flank protection switch could not been thrown or any other condition that could prevent the route from being set completely.
 
It is important to understand that when a route is set, the interlocking system first tries to set the route at shunt route safety level. After that, the additional actions for setting it upto train route safety level will be executed. Therefor, it can happen that when attempting to set a train route, revoking needs to be done at shunt route level.
 
==Setting shunt routes==
 
To set a shunt route, first press the signal start button and the signal end button (or an end button). Both buttons will show up in purple.
[[File:Generic panel route setting 01.png|829px|none]]
 
Then press the "Shunt route" button.
If there are no restrictions, the route will be set.<br/>
Points will be thrown where needed. Finally, the entire shunt route will be shown in a blue.<br/>
The start signal will change to "white", indicating that it is showing a shunt aspect.
[[File:Generic panel route setting 02.png|829px|none]]
It is not possible to "upgrade" a shunt route directly to a train route.<br/>
To upgrade a shunt route to a main route, the start signal has to be set to Stop first.
[[File:Generic panel route setting 03.png|829px|none]]
Now, the route can be "upgraded" to a main route by pressing the signal start button and signal end button again, followed by pressing the "Main route" button.
[[File:Generic panel route setting 04.png|829px|none]]
 
 
==Setting main (train) routes==
 
To set a main route, first press the signal start button and the signal end button (or an end button). Both buttons will show up in purple.
[[File:Generic panel route setting 01.png|829px|none]]
Then press the "Main route" button.<br/>
If there are no restrictions, the route will be set. Points will be thrown where needed. Finally, the entire main route will be shown in a green.<br/>
Any element contributing to the safety requirements of a main route, like flank protection, will be shown in yellow.
[[File:Generic panel route setting 05.png|829px|none]]
<!-- [[File:Generic panel route setting 06.png|829px|none]] -->
<!-- [[File:Generic panel route setting 07.png|829px|none]] -->
 
==Auxialiary Buttons Generic Panel==
 
{| cellpadding="10" cellspacing="0" border="1"
|-
| Description || Afk. || Function
|-
! scope="row" colspan="3" style="color: white; background-color: grey;"| Blocks
|-
| Change Block Direction || BD || Change the block direction
|-
! scope="row" colspan="3" style="color: black; background-color: yellow;"| Level Crossings
|-
| Close Crossing for Traffic || LC || Close level crossing for road traffic
|-
| Keep Crossing Closed ON || LON || Keep the level crosing closed
|-
| Keep Crossing Closed OFF || LOFF || Cancels keeping the level crosing closed
|-
| Crossing Automatic Close OFF || LAOFF || Disables automatic closure of a level crossing
|-
| Crossing Automatic Close ON || LAON || Enables automatic closure of a level crossing
|-
! scope="row" colspan="3" style="color: white; background-color: green;"| Routes
|-
| Release Main Route || RRM || Release a main route
|-
| Release Shunt Route || RRS || Release a shunt route
|-
| Release Main Route Element || RRME || Release a single element of a main route
|-
| Release Shunt Route Element || RRSE || Release a single element of a shunt route
|-
| No Catenary || RCAT || Set a route to a track without catenary
|-
| No Overlap || RONO || Set a main route without an overlap route
|-
| Short Overlap || ROS || Set a main route without an overlap route
|-
| Left Overlap || ROL || Set a main route with a overlap route diverging to the left
|-
| Right Overlap || ROR||  Set a main route with a overlap route diverging to the right
|-
| Reminder ON || MON || Reminder on
|-
| Reminder OFF || MOFF|| Reminder off
|-
| Reminder Override || MORD || Override Reminder of a signal
|-
! scope="row" colspan="3" style="color: white; background-color: red;"| Signals
|-
| Lock Signal || SL || Lock a signal
|-
| Unlock Signal || SU || Unlock a signal
|-
| Call-On Signal || SCAL || Show call-on aspect
|-
| Activate Signal || SA || Activate signal
|-
| Disable ARS || SAOFF || Deactivates automatic route setting for the selected signal
|-
| Enable ARS || SAON || Activates automatic route setting for the selected signal
|-
| STOP || STOP || Sets a signal to Stop. <br/>Always set a signal to Stop before attempting to release a route starting at the signal or to release a overlap route behind the signal
|-
! scope="row" colspan="3" style="color: white; background-color: blue;"| Points
|-
| Throw Points || PT || Manually throw a point
|-
| Lock Points || PL || Lock a point
|-
| Unlock Points || PU|| Unlock a point
|-
| Automatic Points Setting OFF || PAOFF || Activates automatic points setting for a requested route
|-
| Automatic Points Setting ON || PAON || Deactivates automatic points setting for a requested route
|-
! scope="row" colspan="3" | Others
|-
| Main Route || style="color: black; background-color: green;" | ZS || Sets a train route
|-
| Shunt Route || style="color: black; background-color: blue;" | RS || Sets a main route
|-
|}
 
{{EnglishNavBottom}}
<!--
{{GermanNav}}
{{Sprachen_DE|DE=Allgemeines Betriebssystem|EN=Generic Panel|NL=Algemeen Bedieningspaneel}}
 
==Allgemeines Betriebssystem==
 
==Gruppentasten Allgemeines Betriebssystem==
 
{| cellpadding="10" cellspacing="0" border="1"
|-
| Kommando || Abkz. || Aktion
|-
! scope="row" colspan="3" style="color: white; background-color: grey;"| Streckenblock
|-
| Erlaubniswechsel || EW || &nbsp;
|-
! scope="row" colspan="3" style="color: black; background-color: yellow;"| Bahnübergang
|-
| BUE ein || BEIN || &nbsp;
|-
| BUE zu || BZU || &nbsp;
|-
| BUE Offen || BO || &nbsp;
|-
| Anschaltung Aus || BANA || &nbsp;
|-
| Anschaltung Ein || BANE || &nbsp;
|-
! scope="row" colspan="3" style="color: white; background-color: green;"| Fahrstraßen
|-
| Zugstrasse aufloesen || FZA || &nbsp;
|-
| Rangierstrasse aufloesen || FRA || &nbsp;
|-
| Einzelaufloesung Zugstrasse || FZEA || &nbsp;
|-
| Einzelaufloesung Rangierstrasse || FREA || &nbsp;
|-
| kein Fahrdraht || FF || &nbsp;
|-
| kein D-Weg || FDO || &nbsp;
|-
| D-Weg kurz || FDK || &nbsp;
|-
| D-Weg links || FDL || &nbsp;
|-
| D-Weg rechts || FDR || &nbsp;
|-
| Merkhinweis Sperre EIN || MEIN || &nbsp;
|-
| Merkhinweis Sperre AUS || MAUS || &nbsp;
|-
| Merkhinweis Umgehen || MUMG || &nbsp;
|-
! scope="row" colspan="3" style="color: white; background-color: red;"| Signale
|-
| Signal Sperren || SS || &nbsp;
|-
| Signal Entsperren || SE || &nbsp;
|-
| Vorsichtssignal || SVOR || &nbsp;
|-
| Signal Aktivieren || SA || &nbsp;
|-
| Selbsstellbetrieb AUS || SBA || &nbsp;
|-
| Selbsstellbetrieb EIN || SBE || &nbsp;
|-
| STOP || STOP || &nbsp;
|-
! scope="row" colspan="3" style="color: white; background-color: blue;"| Weichen
|-
| Weiche Umlegen || WU || &nbsp;
|-
| Weiche Sperren || WS || &nbsp;
|-
| Weiche Entsperren || WE || &nbsp;
|-
| Laufkette Sperren || WLS || &nbsp;
|-
| Laufkette Entsperren || WLE || &nbsp;
|-
! scope="row" colspan="3" | Übrigen
|-
| Zugstrasse || style="color: black; background-color: green;" | ZS || Zugfahrstrasse einstellen
|-
| Rangierstrasse || style="color: black; background-color: blue;" | RS || Rangierfahrstrasse einstellen
|-
|}
 
 
{{GermanNavBottom}}
-->

Revision as of 10:40, 4 November 2017

Scratch page

Retrieved from ‘https://wiki.railsignalling.org/index.php?title=SratchPage&oldid=10317’