Simulation Network In Detail

Contents | FAQ | Manual | General Tips and Tricks | Change Log | Multiplayer Manual | Line Operations Manual | Voice Communications | Change Log | Developers pages

Page is under construction. Information is subject to change.

The network layout

Connections of a single Simulation node

The picture here show which connections are initiated from a single simulation programm.

Port mapping plan

The table below contains a adviced Port mapping plan for the current existing simulations. Applying such a port mapping allows you to configure port settings per simulation only once, as such that you do not have to worry about any conflicts when running the various simulations

Linke Rheinstrecke (Rheingold project)

Line Operations Rheingold project

The following table shows a suggested port mapping plan for connecting the simulations, being part of the Rheingold project, with each other in Line Operations mode.

Connection	Protocol	KKO	KKO	KWEH	KAND	KBRO	KRE	KBBG	KB	KROI	KSEC	KBR	KKAS	Supervisor
[A] Multiplayer	TCP	55383	55384	55385	55386	55387	55388	55389	55390	55391	55392	55393	55394	--
[B] Line Operation	TCP	56383	56384	56385	56386	56387	56388	56389	56390	56391	56392	56393	56394	--
[C] Passive view	UDP	57383	57384	57385	57386	57387	57388	57389	57390	57392	57392	57393	57394	--
[D] Supervisor view	UDP	--	--	--	--	--	--	--	--	--	--	--	--	57999

Voice Communication Rheingold project

The following table shows a suggested port mapping plan for using voice communication in the simulations being part of the Rheingold project. Note that only the first port (Voice Channel 1) is to be configured in the simulation. The simulation program expects the next 3 ports after the configured port to be available for voice communication as well. More information on Voice communication can be found on the Voice Communications-page .

Connection	Protocol	KKO	KKO	KWEH	KAND	KBRO	KRE	KBBG	KB	KROI	KSEC	KBR	KKAS
[1] Voice Channel 1	UDP	58100	58104	58108	58112	58116	58120	58124	58128	58132	58136	58140	58144
[2] Voice Channel 2	UDP	58101	58105	58109	58113	58117	58121	58125	58129	58133	58137	58141	58145
[3] Voice Channel 3	UDP	58102	58106	58110	58114	58118	58122	58126	58130	58134	58138	58142	58146
[4] Voice Channel 4	UDP	58103	58107	58111	58115	58119	58123	58127	58131	58135	58139	58143	58147

Line Operations Bereich Wuppertal

The following table shows a suggested port mapping plan for connecting the simulations, being part of the Rheingold project, with each other in Line Operations mode.

Connection	Protocol	KWO	KW	KWV	Supervisor
[A] Multiplayer	TCP	55401	55402	55403	--
[B] Line Operation	TCP	56401	56402	56403	--
[C] Passive view	UDP	57401	57402	57403	--
[D] Supervisor view	UDP	--	--	--	57999

Voice Communication Bereich Wuppertal

The following table shows a suggested port mapping plan for using voice communication in the simulations being part of the Rheingold project. Note that only the first port (Voice Channel 1) is to be configured in the simulation. The simulation program expects the next 3 ports after the configured port to be available for voice communication as well. More information on Voice communication can be found on the Voice Communications-page .

Connection	Protocol	KWO	KW	KWV
[1] Voice Channel 1	UDP	58401	58405	58409
[2] Voice Channel 2	UDP	58402	58406	58410
[3] Voice Channel 3	UDP	58403	58407	58411
[4] Voice Channel 4	UDP	58404	58408	58412

Contents | Sp Dr S 60 | FAQ | Manual | General Tips and Tricks | Multiplayer Manual | Line Operations Manual | Voice Communications | Change Log | Developers pages