ZNP801 NL: Difference between revisions
(Created page with '== Purpose == 300px|thumb|left|ZNP801 with an example set of commands shown. The ZNP801 is a system used to alleviate much of the vocal communication…') |
|||
| Line 28: | Line 28: | ||
which indicates you have chosen to accept the train. To actually send your decision, press the ZNS button. The blinking "3 7831" value will now become solid. If you want to refuse the train, simply press ZNL. The blinking "3 7831" will disappear completely. The neighbour will likely try again in a few minutes. | which indicates you have chosen to accept the train. To actually send your decision, press the ZNS button. The blinking "3 7831" value will now become solid. If you want to refuse the train, simply press ZNL. The blinking "3 7831" will disappear completely. The neighbour will likely try again in a few minutes. | ||
=== | === Wijzigen Treinnummers === | ||
Soms is het nodig om handmatig de treinnummers op het paneel te wijzigen. | |||
==== | ==== Wijzigen van een Bestaand Treinnummer ==== | ||
Om een bestaand treinnumer te wijzigen dient het huidige nummer ingetypt te worden gevolgd door het drukken van de T toets. | |||
Dit laatste voegt een streepje ("-") toe. Type vervolgens het nieuwe nummer. | |||
Het ingevoerde commando ziet er dan ongeveer zo uit: | |||
<div style="font-family: monospace; font-size: 18px">12345-56789</div> | <div style="font-family: monospace; font-size: 18px">12345-56789</div> | ||
Indrukken van ZNS voert de actie uit. | |||
==== | ==== Een Nieuw Nummer Instellen ==== | ||
Om een nieuw nummer op het paneel te laten tonen, heeft ZNP801 een treinnummer, een lokale station code en een spoornummer nodig: | |||
<div style="font-family: monospace; font-size: 18px">12345 B 204</div> | <div style="font-family: monospace; font-size: 18px">12345 B 204</div> | ||
De lokale station code is, gelijkwaardig aan een buurpost code, alleen in dit geval verwijst het naar je eigen station. | |||
==== Nummer Wissen ==== | ==== Nummer Wissen ==== | ||
Revision as of 13:33, 14 November 2010
Purpose
The ZNP801 is a system used to alleviate much of the vocal communication between dispatchers in neighbouring signal boxes. Offering, accepting, refusing, and cancelling of trains are supported by this system. Additionally, train numbers can be changed on the panel.
Operation
The system works by collecting a series of values and commands. When the sequence has been entered, the dispatcher sends the commands to a neighbour. The neighbour, using his ZNP801, makes a decision about how to handle the request.
Offering Trains
To offer a train, you need to enter the train number, followed by the station to which you're sending the train, followed by the track number, and completed with the "ANB" command. "ANB" indicates that this is an offering. For example, sending train "3435" with steering number "1" to neighbour "XYZ" on track "123", you would enter:
To actually send the command, press "ZNS". The train number will begin to blink on the panel. What this means is that the command has been sent to the neighbour, and you are waiting for his acceptance or refusal. If he refuses, the number stops blinking and disappears. If he accepts, the number stops blinking and becomes solid. The neighbour might take a minute or two to accept or refuse, so be patient
Accepting and Refusing Trains
When a neighbour offers a train to you, the ZNP801 will show you a display similar to the following:
This means that the dispatcher of the neighbour XYZ is wanting to send train 3567 to you via track 251. If you want to accept the train, press ANN. The display now shows
which indicates you have chosen to accept the train. To actually send your decision, press the ZNS button. The blinking "3 7831" value will now become solid. If you want to refuse the train, simply press ZNL. The blinking "3 7831" will disappear completely. The neighbour will likely try again in a few minutes.
Wijzigen Treinnummers
Soms is het nodig om handmatig de treinnummers op het paneel te wijzigen.
Wijzigen van een Bestaand Treinnummer
Om een bestaand treinnumer te wijzigen dient het huidige nummer ingetypt te worden gevolgd door het drukken van de T toets. Dit laatste voegt een streepje ("-") toe. Type vervolgens het nieuwe nummer. Het ingevoerde commando ziet er dan ongeveer zo uit:
Indrukken van ZNS voert de actie uit.
Een Nieuw Nummer Instellen
Om een nieuw nummer op het paneel te laten tonen, heeft ZNP801 een treinnummer, een lokale station code en een spoornummer nodig:
De lokale station code is, gelijkwaardig aan een buurpost code, alleen in dit geval verwijst het naar je eigen station.
Nummer Wissen
Typ het te wissen nummer gevolgd door ZNL om een op het paneel getoond nummer te wissen.
Wissen van Invoer
Druk op de LOE toets als je een fout maakt tijdens invoeren of als je besluit een bepaalde actie toch niet uit te voeren