TimeTable

This table defines the train schedule and supports a wide range of features for delivering realistic traffic.

ID: (int); Automatically increments.

Train_Type: (string); Gives a name for the type of train. This string can be anything, and is displayed in the Train Overview window, and elsewhere.

TrainPhysicsModelID: (int); ID number from the TrainTypes table, defining the physics properties of the train.

Train_ID_Tech: (string); Identifier used to like with movement orders in the movement order table (Train_ID_SOFT). This allows for trains with the same train ID to have different movement orders.

Train_ID: (string); Is the train number.

SortingTime: (date); Used to sort the schedule.

CrossingWithTrain: (date); On a single line track the simulation will search for this train and ask before spawning if it has NOT arrived on the spawn track.

DependsOnTrain: (int); Database ID of the train this train depends on - this means that the specified train must have already left the simulation for this train to spawn.

DependsOnDelay: (int); Defines the length of time between the first train despawning and this train spawning. Value is in minutes.

EntryPoint: (string); For spawning trains, this is the name of the spawn track. This can be left empty for trains that do not spawn.; The simulations that feature Line Operations can use a common timetable database. When a common database is applied the format is slightly different; Example - KRE,SPAWN_BROHL_0;KBBG,SPAWN_REMAGEN_0;KB,SPAWN_GODESBERG_0; Each spawning point is pre-fixed with the shortcode of the simulation followed by a comma (,). Each spawing point is then separated by an semicolon (;)

EntryPoint_time: (date); Defines the time the train actually spawns. Stand-alone simulations.; (string); Defines the time the train actually spawns. Simulations that feature Line Operations.; Example - KRE,07:27;KBBG,07:27;KB,07:27; Each spawning time is pre-fixed with the shortcode of the simulation followed by a comma (,). Each spawing time is then separated by an semicolon (;)

ExtraordinaryTrack: (string); Defines the track or tracks that trains may be placed at on simulation start. Multiple tracks are separated by spaces.

ExtraordinaryDirection: (int); Defines the direction of the train when being placed. 0 = left, 1 = right.

ConsistTemplateID: (int); Defines the consist template from the ConsistTemplate table.

PathTemplateID: (int); Used to indicate the path template to use for routing the train.

Origin: (string); Defines where the train is originally from.

Destination: (string); Defines where the train is ultimately destined.

Start_NX: (string); Where the train enters the simulation. This is often the name of the neighbouring station.

End_NX: (string); Where the train exits the simulation. This is often the name of the neighbouring station.

ExitPoint: (string); The name of the exit spawn track.

TimeTableStops: (string); Encodes all the data needed to describe all the timetable stops. The format of the timetable stops can be found here.

EngineeringTrain: (bool); True when the train is an engineering train.

DelayLambdaWorkDays: (float); Defines a number between 0.2 (spread delays) to 1 (normal amount delays) to 2 (large delays).

DelayLambdaWeekend: (float); Defines a number between 0.2 (spread delays) to 1 (normal amount delays) to 2 (large delays).

IsShuntMovementOnly: (bool); True when the train is a shunt movement.

PeriodStart: (date); Starting date when this train is valid.

PeriodEnd: (date); Ending date when this train is valid.

Monday: (bool); True when this train runs on Monday

Tuesday: (bool); True when this train runs on Tuesday

Wednesday: (bool); True when this train runs on Wednesday

Thursday: (bool); True when this train runs on Thursday

Friday: (bool); True when this train runs on Friday

Saturday: (bool); True when this train runs on Saturday

Sunday: (bool); True when this train runs on Sunday

IsFACTrain: (bool); True when this train is a FAC train.

DoNotTakeMOOnRenumber: (bool); True this train should not get movement orders as a result of a renumber, couple, uncouple, etc.

Opmerking: (string); Remarks. This text shows within the simulation in the Train Overview window. Typically this is a language neutral code that indicates what the train is supposed to do (movement orders).

Communication: (string); Undocumented.

Skip: (bool); True when this train should not be spawned. This has the same effect as leaving the EntryPoint_time empty.

DriverType: (int); Type of driver as defined in DriverType table.

There may be other fields in this table. Some of these fields are used to automatically generate the values in other fields, such as the TimeTableStops field. This is done with external tools that are separate from the simulation. Other fields are used only for the purpose of generating a printed timetable and are used by either passengers or dispatchers only and are not used by the simulation. As a timetable developer, you are free to add any fields you like for your own purposes. These fields will be ignored by the simulation.

Commonly used extra fields are:

[...] = placeholder for timetablestop abbreviation.

[...]_arr

This is the arrival time of that stop (if empty and _dep is filled, it's a starting or passing through train)

[...]_dep

This is the departure time of that stop (if empty and _arr is filled, it's an arriving train only (ending))

[...]_track

The planned platformtrack for the sim. (5a/5b becomes 5)

[...]_nicetrack

the planned platformtrack for the user print version

[...]_CTA

the roll number for the PID's

TimeTable

Navigation menu

Search