Örtliche Kenntnisse für Remagen
Inhalt | Gebrauchsanleitung und Tips Sp Dr S 60 | FAQ | Gebrauchsanleitung Betriebszentrale | Gebrauchsanleitung Streckenverbindung | Sprachkommunikation | Verzeichnis der Änderungen | Developers pages
An dieser Seite wird noch gearbeitet. Die Inhalte sind noch unter Vorbehalt!
Coming soon
Bevor Sie zum ersten Mal auf einem Stellwerk Dienst schieben, müssen Sie sich mit den Örtlichkeiten vertraut machen und über die Besonderheiten informieren. Nach der allgemeinen Ausbildung zum Stellwerkswärter wurden die angehenden Fahrdienstleiter immer wochenlang neben einen Fachmann auf dem Stellwerk eingesetzt. Dieses Kapitel ist diese erste Einweisung für Sie als Fahrdienstleiter. Lesen Sie es sorgfältig durch. Es enthält sehr wichtige Angaben aus der Praxis.
Der Text ist von “Kollege zu Kollege” geschrieben, als ob Sie auf dem Stellwerk sind, den ersten Tag nach der Ausbildung.
Das Sp Dr S 60-Stellwerk Remagen im Überblick
Stellwerk Remagen
Einige Stellwerksdaten:
- 72 Weichen
- 113 Signale
- 173 Gleisfreimeldeabschnitte
- 66 Kilometer gesamte Gleislänge
- 943 Fahrstraßen
- 390 Tasten auf dem Stelltisch
- 72x30 Tischfelder (= 2160 Tischfelder)
- 1 Bahnübergang (Vollschranke)
- Gruppentasten auf dem Stelltisch
- Nummernstellpult
- ZNP801 Zugnummermeldeanlage
- freistehender Zs 6 Anzeiger
- Signalhelligkeit / Stelltischhelligkeit einstellen
- Achszähler und Achszählgrundstellungstaste
- verkürzte und ablenkende Durchrutschwege
Neu:
- Stellwerksverknüpfung mit Bonn-Bad Godesberg (und in Zukunft mit Brohl)
Die Vollschranke kann auf Wunsch mit BÜFT freigemeldet werden (Expertenoption). In der Grundausstattung wird der BÜ automatisch freigemeldet.
Rolandseck
Rolandseck ist ein Haltepunkt auf der freien Strecke zwischen den Bahnhöfen Oberwinter und Mehlem. Er liegt zwischen den Gleisabschnitten 364/365 and 363/362. Nur die Linie RB 73XX hält hin und wieder am Rolandseck.
Rechts oben schließt sich der Stellbereich des Fdl Bonn Bad-Godesberg an. Erste Betriebsstelle dort ist die Ausweichstelle 'Neuer Weg'.
Oberwinter
Der Bahnhof Oberwinter läuft normalerweise im Sellbstbetrieb. Der Verkehr von Remagen Richtung Bad-Godesberg läuft über Gleis 302, und die Gegenrichtung über 301.
Nur die Linien SE 35XX und RB 73XX halten planmässig in Oberwinter.
Ein bisschen aufpassen muss man wenn man zwischen Remagen und Oberwinter im Gleiswechselbetrieb fährt, weil die einzige Ausfahrtmöglichkeit von Oberwinter weiter Richtung Bad-Godesberg ist via Gleis 303! Von dort kann man entweder weiter im GWB fahren oder zurück aufs Regelgleis wechseln.
Remagen
Normally we have Remagen running in Sellbstbetrieb (auto fleeting) as there is not that much variation in track occuption at Remagen station. And for those few exceptions, we just have to make sure that we set our routes in time before the Sellbstbetrieb does it for us. But it is no problem if you switch the Sellbstbetrieb off for signals F954, P001, A951 and N003. Switch auto fleeting off for each signal using the SBRT button and the signal button. If you are more used to how we normally work, you can switch it on again using the SBET button together with signal buttons.
The station of Remagen has 5 platform tracks. The trains from the south (Brohl) normally stop at track 001. Only train series SE 3500 and RB 7300 have to go to track 002, as these trains have a long stop and will be overtaken by an IC. Trains from the North (Bonn) normally have their stops at track 003. The exception on thi srule is again applicable for train series SE 3500 and RB 7300. They will have a long stop at track 004.
Other services that stop at Remagen are the series IR 2300, IR 2400, IR 2500 and a couple of D trains.
Track 005, and in some cases track 004, is used for the trains to and from the Arthalbahn. The Arthalbahn starts at Remagen, and connects into the direction of Bad-Neuenahr via track 955 and 956. It is a non-electrified line, so you need to use the FfrT group button for setting routes towards track 955. Train series RB 7100 are the trains to and from the Arthalbahn.
Track 068 is out of order. We have taken are measure to avoid that we accidentaly stable a train overthere.
Sinzig (Rhein)
A couple of trains in the RB 7300 also a service between Remagen and Koblenz. Those trains have a short stop in Sinzig. All other trains just pass by this little station.
Left from Sinzig we have the possibilty to put a delayed train to the side, so that they can be overtaken by another train.
Also left from Sinzig we have one level crossing (km 58.106) with full barriers. If a route has been set and the barriers have closed, we need to confirm that the level crossing is free of other traffic. You will hear a bell ringing as long as the barriers are closing. Secure the level crossing with the BüFT group button and the yellow dotted button of the level crossing. (* this is an expert option)
In Sinzig we have locked track 414, 424 and 463, as those tracks haven't been used for years.
Bad Breisig
Bad Breisig is located on the open line left from Sinzig. The only train series that do stop here are the RB 7300 trains