Control Monitor Sp Dr S 600

Page is under construction. Information is subject to change.

Contents | FAQ | Manual | General Tips and Tricks | Change Log | Multiplayer Manual | Line Operations Manual | Voice Communications | Change Log | Developers pages

Deutsch   Nederlands

Data Entry Keyboard

•  : Zoom in

•  : Zoom out

Keys to execute commands

Key	Function
	Execute and erase command from command line
	Execute and store command into active memory block
	Store input into active memory block
	Entered number (1 through 6) selects the corresponding memory block
	Entered number clears the corresponding line in the active memory block
	Clear command line
	Send train number
	Clear train number

Commands for setting routes

These commands are applied by pressing or , or can be stored in the active memory block by applying .

Input	Function
123.345	Sets train route from signal 123 to signal/exit track 345
123-345	Sets shunt route from signal 123 to signal/exit track 345

Extra codes for setting train routes

Input	Function
F,123.345	Sets train route from signal 123 to signal/exit track 345, where no overhead lines are available
123.345K	Sets train route from signal 123 to signal/exit track 345, without or short overlap
123.345L	Sets train route from signal 123 to signal/exit track 345, with divering overlap to the left
123.345R	Sets train route from signal 123 to signal/exit track 345, with divering overlap to the right

Eenvoudige commando's

These commands are applied by pressing or , or can be stored in the active memory block by applying . Example: WU,123 = Throw switch 123.

Command	Action
Switches
WU	Throw switch
WUS	Manually locks a switch to prevent it from being thrown
WUE	Manually unlocks a switch to prevent it from being thrown.
WPH	Show switch position shortly.
FRTE	Revokes a part of a train route. (Reminder: First operate start signal with HS/HaGT!)
Signals
HS	Puts a signal to stop
SS	??
??	??
Routes
FRTG	Revokes a complete train route. (Reminder: First operate start signal with HS/HaGT!)
SBA	Enables fleeting of a signal.
SBE	Disables fleeting of a signal.
Blocks
EA	Used to set a block direction towards your signal box
EL	Used to cancel pre-setting a block direction towards your signal box.

Treinnummer ingave

Deze commando's worden met of afgesloten.

Invoer	Funktie
FFFFF,123 +	Beschikbaarheidscode "FFFFF" (Bovenleiding buiten bedrijf) voor spoor 123 aanbrengen
0F0F0,123 +	Beschikbaarheidscode "0F0F0" (Spoor volledig buiten dienst) voor Gleis 123 aanbrengen
00000,123 +	Beschikbaarheidscode "00000" (Spoor permanent buiten dienst) voor Gleis 123 aanbrengen
,123 +	Beschikbaarheidscode voor spoor 123 verwijderen
987,123 +	Nummer 987 op spoor 123 aanbrengen
100987,123 +	Stuurcijfer 1 en treinnummer 987 worden op spoor 123 aangebracht
987 +	Treinnummer 987 op het panneel verwijderen

Contents | Sp Dr S 60 | FAQ | Manual | General Tips and Tricks | Multiplayer Manual | Line Operations Manual | Voice Communications | Change Log | Developers pages