Control Monitor Sp Dr S 600

Page is under construction. Information is subject to change.

Contents | FAQ | Manual | General Tips and Tricks | Change Log | Multiplayer Manual | Line Operations Manual | Voice Communications | Change Log | Developers pages

Deutsch   Nederlands

Control Monitor

• 

1. Command line
2. Memory blocks
3. Line showing offered trains
4. Keys to excute commands

When you right-click in the control monitor, you will get several additional options for the presentation of the control monitor. You can hide / unhide the kes to excute commands, change the size of the control monitor window as well as changing the screen colors.

Screen colors

Symbol	Colors
	Grey / Black
	Green / Black
	Black/ White
	Orange / Black
	Black / Orange

Data Entry Keyboard

•  : Zoom in

•  : Zoom out

Keys to execute commands

Key	Function
	Execute and erase command from command line
	Execute and store command into active memory block
	Store input into active memory block
	Entered number (1 through 6) selects the corresponding memory block
	Entered number clears the corresponding line in the active memory block
	Clear command line
	Send train number
	Clear train number

Commands for setting routes

These commands are applied by pressing or , or can be stored in the active memory block by applying .

Input	Function
123.345	Sets train route from signal 123 to signal/exit track 345
123-345	Sets shunt route from signal 123 to signal/exit track 345

Extra codes for setting train routes

Input	Function
F,123.345	Sets train route from signal 123 to signal/exit track 345, where no overhead lines are available
123.345K	Sets train route from signal 123 to signal/exit track 345, without or short overlap
123.345L	Sets train route from signal 123 to signal/exit track 345, with diverging overlap to the left
123.345R	Sets train route from signal 123 to signal/exit track 345, with diverging overlap to the right
M,103.P3	Sets route from middle switch starting at signal 103 towards signal P3
U,123.345	Sets an alternative route from signal 123 towards signal/exit track 345
F,U,123.345	Sets an alternative route from signal 123 towards signal/exit track 345, where no overhead lines are available

Simple commands

These commands are applied by pressing or , or can be stored in the active memory block by applying . Example: WU,123 = Throw switch 123.

Command	Action
Switches
WU	Throw switch
WUS	Manually locks a switch to prevent it from being thrown
WUE	Manually unlocks a switch to prevent it from being thrown.
WPH	Show switch position shortly.
FRTE	Revokes a part of a train route. (Reminder: First operate start signal with HS/HaGT!)
Signals
HS	Puts a signal to stop
SS	Lock signal
Routes
FRTG	Revokes a complete train route. (Reminder: First operate start signal with HS/HaGT!)
SBA	Enables fleeting of a signal.
SBE	Disables fleeting of a signal.
Blocks
EA	Used to set a block direction towards your signal box
EL	Used to cancel pre-setting a block direction towards your signal box.
Panel
AE,1	Show all switch positions
AA,1	Disable showing all switch positions
NE,1	Sets (outside) signal brightness to night mode
TE,1	Sets (outside) signal brightness to day mode

Entering Train numbers

These commands are executed by applying or .

Input	Function
FFFFF,123 +	Sets Track availability code "FFFFF" (track is out of service for electric trains) on track 123
0F0F0,123 +	Sets Track availability code "0F0F0" (track is not available / track is occupied without train number) on track 123
00000,123 +	Sets Track availability code "00000" (track is out of service) on track 123
,123 +	Removes Track availability code from track 123
987,123 +	Sets train number 987 on track 987
100987,123 +	Sets steering number 1 and train number 987 on track 987
987 +	Removes train number 987 from the panel
ANB-4711,575 +	Offer train 4711 on track 575
ANN +	Accept train that is offered on ZN line (quick method)
ANB-4711,575 +	Cancel previously offered train 4711 on track 575
ANN +	Refuse train that is offered on ZN line (quick method)
ANN-4711,575 +	Refuse train 4711 that is offered on track 575

Special commands

The following commands are computer-specific. Those are necessary, as the PC does not have the special keyboard as present on a real signal box.

Input	Function
[memory block number] /	Change to memory block. By entering 3 and / (Numeric keyboard) memory block 3 becomes the active memory block.
[Line number of active memory block]	Entering 3 (Numeric keyboard) executes the command on line 3 of the active memory block.
* (Numeric keyboard)	Contents of the command line are stored in the first unused line of the active memory block.
Left Arrow	Change to previous 6 memory blocks
Right Arrow	Change to next 6 memory blocks
Space	Control monitor window to the front and activate
Escape	Deactivate control monitor window (allowing other keyboard input resp. commands)

Contents | Sp Dr S 60 | FAQ | Manual | General Tips and Tricks | Multiplayer Manual | Line Operations Manual | Voice Communications | Change Log | Developers pages